Ensure the device is powered down and unplugged.
  • Ensure the device is powered down and unplugged.

  • Turn the device upside down with the battery compartment facing you.

  • Slide the black slider to the right and lift the battery out of its compartment.

Ajouter un commentaire

Locate and remove the six Phillips PM2.5×7.0 screws around the perimeter of the back plate.
  • Locate and remove the six Phillips PM2.5×7.0 screws around the perimeter of the back plate.

    • These screws do not completely detach from the device when unscrewed.

Ajouter un commentaire

Use the plastic opening tool to lift up the back plate and set it aside. Use the plastic opening tool to lift up the back plate and set it aside.
  • Use the plastic opening tool to lift up the back plate and set it aside.

Ajouter un commentaire

Locate the wifi card to the right of the RAM.
  • Locate the wifi card to the right of the RAM.

Ajouter un commentaire

Unplug antenna cables 1 and 2 from their leads.
  • Unplug antenna cables 1 and 2 from their leads.

    • Antenna cable 3 is not used.

Ajouter un commentaire

Remove the two Phillips head screws located on the battery compartment side of the wifi card.
  • Remove the two Phillips head screws located on the battery compartment side of the wifi card.

Ajouter un commentaire

Gently lift the wifi card up to a 45 degree angle from the side with screws.
  • Gently lift the wifi card up to a 45 degree angle from the side with screws.

Ajouter un commentaire

Unplug the wifi card. Unplug the wifi card.
  • Unplug the wifi card.

Ajouter un commentaire

These next steps are for installing your replacement wifi card. These steps are very important to ensure that you do not damage your device.
  • These next steps are for installing your replacement wifi card. These steps are very important to ensure that you do not damage your device.

  • Fully insert the replacement wifi card at a 45 degree angle, ensuring that the notch on the card lines up with the peg on the plug.

Ajouter un commentaire

Gently push the wifi card down until the screws can be replaced.
  • Gently push the wifi card down until the screws can be replaced.

Ajouter un commentaire

Connect the antenna cable 1 with lead 1 and connect antenna cable 2 with lead 2.
  • Connect the antenna cable 1 with lead 1 and connect antenna cable 2 with lead 2.

    • Wire 1 needs to be connected to lead 1 and wire 2 needs to be connected to lead 2.

    • Wire 3 and lead 3 are not used.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Anmol Mathur

Membre depuis le 14/04/2014

291 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 12-34, Maness Spring 2014 Membre de l'équipe Cal Poly, Team 12-34, Maness Spring 2014

CPSU-MANESS-S14S12G34

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 26

Total : 1,099