Pièces

Aucune pièce nécessaire.

Shut the device off. Lift the top cover of the scanner. Carefully, pry the plastic frame surrounding the glass away from the printer hood using a plastic prying tool.
  • Shut the device off.

  • Lift the top cover of the scanner.

  • Carefully, pry the plastic frame surrounding the glass away from the printer hood using a plastic prying tool.

  • Pull the frame out.

Ajouter un commentaire

Unscrew the two screws that fasten the frame to the printer hood. Use a T10 screwdriver
  • Unscrew the two screws that fasten the frame to the printer hood. Use a T10 screwdriver

Ajouter un commentaire

Pushing the clip behind the cover piece in, pull the cover piece outwards. Pushing the clip behind the cover piece in, pull the cover piece outwards.
  • Pushing the clip behind the cover piece in, pull the cover piece outwards.

Ajouter un commentaire

Remove the two screws on the front of the printer with a T10 screwdriver. The first is inside the power button panel space and the second is across the printer slider.
  • Remove the two screws on the front of the printer with a T10 screwdriver.

    • The first is inside the power button panel space and the second is across the printer slider.

Ajouter un commentaire

Pull the circuit board from the power button panel space.
  • Pull the circuit board from the power button panel space.

  • Unplug the small ribbon cable from the circuit board.

Ajouter un commentaire

Pull the memory card reader's circuit board out of its slot. Detach the rainbow connector from the back of the circuit board.
  • Pull the memory card reader's circuit board out of its slot.

  • Detach the rainbow connector from the back of the circuit board.

Ajouter un commentaire

Press the clip directly behind the TouchSmart panel and pull the panel up. Disconnect the ribbon cable from the TouchSmart panel. This detaches the panel from the printer body.
  • Press the clip directly behind the TouchSmart panel and pull the panel up.

  • Disconnect the ribbon cable from the TouchSmart panel. This detaches the panel from the printer body.

  • Do not hesitate to use force to remove the TouchSmart panel.

Ajouter un commentaire

Grip the printer hood and pull upward.
  • Grip the printer hood and pull upward.

Ajouter un commentaire

Remove the three screws securing the motherboard.
  • Remove the three screws securing the motherboard.

Ajouter un commentaire

Remove the seven cables attached to the motherboard.
  • Remove the seven cables attached to the motherboard.

Ajouter un commentaire

Lift motherboard out of the slot.
  • Lift motherboard out of the slot.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

garrett hall

Membre depuis le 26/09/2012

19 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 2-11, Propen Fall 2012 Membre de l'équipe Cal Poly, Team 2-11, Propen Fall 2012

CPSU-PROPEN-F12S2G11

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 14

Total : 3,418