Aller au contenu principal

HP iPAQ H2200 Joypad Replacement

Ce dont vous avez besoin

  1. HP iPAQ H2200 Joypad Replacement, Battery: étape 1, image 1 de 1
    • Press and slide the battery cover tab to remove battery cover.

  2. HP iPAQ H2200 Joypad Replacement: étape 2, image 1 de 2 HP iPAQ H2200 Joypad Replacement: étape 2, image 2 de 2
    • Pull on the black tab to lift the battery out of the battery compartment.

  3. HP iPAQ H2200 Joypad Replacement, Main Board: étape 3, image 1 de 1
    • Remove the stylus by sliding it out of the slot.

  4. HP iPAQ H2200 Joypad Replacement: étape 4, image 1 de 1
    • Remove the CF card by sliding it out of the slot at the top of the device.

  5. HP iPAQ H2200 Joypad Replacement: étape 5, image 1 de 1
    • Press down and push the black side strips toward the top of the device to remove them.

  6. HP iPAQ H2200 Joypad Replacement: étape 6, image 1 de 3 HP iPAQ H2200 Joypad Replacement: étape 6, image 2 de 3 HP iPAQ H2200 Joypad Replacement: étape 6, image 3 de 3
    • Using the T5 Torx screwdriver, remove all six screws on the back and all screws on each side of the device.

  7. HP iPAQ H2200 Joypad Replacement: étape 7, image 1 de 2 HP iPAQ H2200 Joypad Replacement: étape 7, image 2 de 2
    • Remove the back faceplate by pushing and loosening the 4 side slots (2 on each side).

  8. HP iPAQ H2200 Joypad Replacement: étape 8, image 1 de 1
    • Open the LCD connector, where the orange strip attaches to the main board.

  9. HP iPAQ H2200 Joypad Replacement: étape 9, image 1 de 1
    • Carefully remove the orange LCD strip from the connector.

  10. HP iPAQ H2200 Joypad Replacement: étape 10, image 1 de 1
    • Unscrew the 2 screws located at each top corner of the main board.

  11. HP iPAQ H2200 Joypad Replacement: étape 11, image 1 de 1
    • Remove the main board by pushing outward on the two tabs located on each side near the bottom of the device.

  12. HP iPAQ H2200 Joypad Replacement, Joypad: étape 12, image 1 de 1
    • Press on the four joypad tabs on the back, and push it through and out the front.

  13. HP iPAQ H2200 Joypad Replacement: étape 13, image 1 de 1
    • Push the new joypad through the hole; the tabs will lock it into place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tyler Andrews

Membre depuis le 01/13/10

209 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 4-12, Forte Winter 2010 Membre de l'équipe Cal Poly, Team 4-12, Forte Winter 2010

CPSU-FORTE-W10S4G12

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 3,036