Pièces

Aucune pièce nécessaire.

Remove the back cover by applying pressure and sliding upward. Lift the back cover up and away from the phone. Lift the back cover up and away from the phone.
  • Remove the back cover by applying pressure and sliding upward.

  • Lift the back cover up and away from the phone.

Ajouter un commentaire

Remove the battery by lifting upward from the slot located on the right hand side. Remove the battery by lifting upward from the slot located on the right hand side.
  • Remove the battery by lifting upward from the slot located on the right hand side.

Ajouter un commentaire

Using a T-5 screwdriver head, remove the four screws in corners as shown. Using a T-5 screwdriver head, remove the four screws in corners as shown.
  • Using a T-5 screwdriver head, remove the four screws in corners as shown.

Ajouter un commentaire

Lift the part shown in picture 2 on the top side of the phone. There is a ribbon attached on the back of this part that requires caution to remove. There is a ribbon attached on the back of this part that requires caution to remove.
  • Lift the part shown in picture 2 on the top side of the phone.

  • There is a ribbon attached on the back of this part that requires caution to remove.

Ajouter un commentaire

Use the tweezers to pull up and off the camera cover. Use the tweezers to pull up and the off camera.
  • Use the tweezers to pull up and off the camera cover.

  • Use the tweezers to pull up and the off camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Melinda Phan

Membre depuis le 17/04/2011

435 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 9-64, Walters Spring 2011 Membre de l'équipe Cal Poly, Team 9-64, Walters Spring 2011

CPSU-WALTERS-S11S9G64

5 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 2,340