Introduction

The brush rolls of the Hoover Power Path Pro Advanced picks up debris from the floor. However, large debris can cause the brush rolls to stop spinning. When this happens, the brush rolls need to be removed for cleaning.

Unplug the vacuum cleaner from the wall outlet before starting.  Make sure the water tanks are empty. Lay the cleaner down horizontally with its wheels closest to the floor.
  • Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.

  • Lay the cleaner down horizontally with its wheels closest to the floor.

Ajouter un commentaire

Kits de RAM Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits de RAM Mac
Obtenez plus de mémoire sur votre Mac.
Hold the lower brush roll with both hands and pull outwards until it is detached. Hold the lower brush roll with both hands and pull outwards until it is detached.
  • Hold the lower brush roll with both hands and pull outwards until it is detached.

Ajouter un commentaire

Unscrew the 6 marked screws using a Phillips #2 head screwdriver.
  • Unscrew the 6 marked screws using a Phillips #2 head screwdriver.

  • Remove the brush roller.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Équipe

Cal Poly, Team S16-G5, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S16-G5, Banghart Winter 2018

CPSU-BANGHART-W18S16G5

5 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 29

Total : 101