Introduction

Nozzle that releases the water/solution and sucks up dirty water. Also where the hose can be attached/detached. This nozzle may need to be cleaned after usage, so removal is necessary.

Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

Unlatch the grey switch labeled “Tank Release”.
  • Unlatch the grey switch labeled “Tank Release”.

Ajouter un commentaire

Gently pull on the water tank until it releases from the base.
  • Gently pull on the water tank until it releases from the base.

Ajouter un commentaire

Lift the switch that was covered by removing the tank.
  • Lift the switch that was covered by removing the tank.

Ajouter un commentaire

Pull the nozzle until out of place.
  • Pull the nozzle until out of place.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Anthony Margulis

Membre depuis le 22/01/2018

85 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S16-G4, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S16-G4, Banghart Winter 2018

CPSU-BANGHART-W18S16G4

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 39