Introduction

Instructions on how to replace the height adjustment wheels at the bottom of the vacuum.

Pièces

Aucune pièce nécessaire.

Place the vacuum on its back. Push the red switch to the left.
  • Place the vacuum on its back.

  • Push the red switch to the left.

  • The black cover will then pop out. Remove the cover.

Ajouter un commentaire

Locate the red switch near the head of the vacuum. Push the switch left. This will pop out the plastic base plate. Remove the plate from the vacuum.
  • Locate the red switch near the head of the vacuum.

  • Push the switch left.

  • This will pop out the plastic base plate. Remove the plate from the vacuum.

Ajouter un commentaire

Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame. Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame. Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.
  • Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.

Ajouter un commentaire

Remove screws from the left side of the white plastic frame. Remove screws from the left side of the white plastic frame. Remove screws from the left side of the white plastic frame.
  • Remove screws from the left side of the white plastic frame.

Ajouter un commentaire

Pull the white plastic frame away from the vacuum. Slide the vacuum belt off the metal rod. Pull the brush off the vacuum.
  • Pull the white plastic frame away from the vacuum.

  • Slide the vacuum belt off the metal rod.

  • Pull the brush off the vacuum.

Ajouter un commentaire

Remove the screws at the bottom of the white frame near the roller. Remove the screws at the bottom of the white frame near the roller.
  • Remove the screws at the bottom of the white frame near the roller.

Ajouter un commentaire

Pop off the right side of the white frame. Pull down the blue hinge and roller. Pull free the roller from the vacuum.
  • Pop off the right side of the white frame.

  • Pull down the blue hinge and roller.

  • Pull free the roller from the vacuum.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Yung

Membre depuis le 18/01/2018

241 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S12-G4, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 19