Introduction

This guide will help you into replacing the inlet filter in the body of the vacuum.

Outils

Pièces

Aucune pièce nécessaire.

Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body. Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.
  • Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.

Ajouter un commentaire

Locate the large sieve at the bottom of the vacuum body. Lift off the sieve, separating it from the filter.
  • Locate the large sieve at the bottom of the vacuum body.

  • Lift off the sieve, separating it from the filter.

Ajouter un commentaire

Remove the old inlet filter from the vacuum body and replace with the new filter.
  • Remove the old inlet filter from the vacuum body and replace with the new filter.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Yung

Membre depuis le 18/01/2018

241 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S12-G4, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 13