Introduction

Float valves may wear out over time, preventing them from rising or falling correctly. This guide will demonstrate how to replace the float valve.

Remove the lid and place it upside-down on a flat surface.
  • Remove the lid and place it upside-down on a flat surface.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Pinch the rubber gasket on the float valve and pull up.
  • Pinch the rubber gasket on the float valve and pull up.

Ajouter un commentaire

Pull the rubber gasket off of the metal rod. The valve will fall out of its hole onto the table. It can now be cleaned or replaced.
  • Pull the rubber gasket off of the metal rod.

  • The valve will fall out of its hole onto the table. It can now be cleaned or replaced.

  • You may find it helpful to push up on the float valve from the other side of the lid while you remove the gasket.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Savannah Webb

Membre depuis le 18/01/2018

639 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S12-G3, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 46