Introduction

How to replace the fuse on Insignia Ice Maker.

Pièces

Aucune pièce nécessaire.

Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing.
  • Remove the 6 screws along the bottom of the rear casing.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required. Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.
  • Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.

Ajouter un commentaire

Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool.
  • Remove the fuse with a plastic pry tool.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Evan Taylor

Membre depuis le 18/01/2018

517 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S21-G3, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S21-G3, Banghart Winter 2018

CPSU-BANGHART-W18S21G3

2 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 11

Total : 45