Introduction

The Insignia 2-in-1 Handheld/Stick vacuum can lose its ability to create suction. Use this guide to access the vacuum's motor for replacement and troubleshooting.

Pièces

Aucune pièce nécessaire.

Push down the black button to release the dust cup. Pull the dust cup up and away from handheld portion to remove.
  • Push down the black button to release the dust cup.

  • Pull the dust cup up and away from handheld portion to remove.

Ajouter un commentaire

Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver. Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring. Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.
  • Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.

  • Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Pull apart the red and black wires. Do so for all of the wires. (Red x1, Black x2)
  • Pull apart the red and black wires.

  • Do so for all of the wires. (Red x1, Black x2)

Ajouter un commentaire

Remove the tape holding the battery to the black housing.
  • Remove the tape holding the battery to the black housing.

  • Slide the entire battery bundle out.

Ajouter un commentaire

Use plastic spudger to remove blue wire from motor, freeing the motor. Use plastic spudger to remove blue wire from motor, freeing the motor.
  • Use plastic spudger to remove blue wire from motor, freeing the motor.

Ajouter un commentaire

Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing. Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing.
  • Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Thibaut Pillot

Membre depuis le 15/02/2018

421 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S16-G3, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S16-G3, Boczar Spring 2018

USFT-BOCZAR-S18S16G3

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 44