Introduction

The anti-block shield prevents little bits of food from clogging up the pressure release valve. It must be removed and cleaned after every use. This guide will demonstrate how to remove the anti-block shield on the device.

Pièces

Aucune pièce nécessaire.

Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base. Turn the lid upside down to access the anti-block shield.
  • Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

  • Turn the lid upside down to access the anti-block shield.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Wedge the iFixit opening tool between the anti-block shield and the underside of the lid. Push down on the opening tool until the anti-block shield pops out.
  • Wedge the iFixit opening tool between the anti-block shield and the underside of the lid.

  • Push down on the opening tool until the anti-block shield pops out.

  • The anti-block shield is fit very securely over the vent. It may take some force for it to pop out, and the part may pop out with some speed.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Anya (Anna) Houk

Membre depuis le 24/01/2018

89 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S1-G4, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S1-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 50