Introduction

This guide will show you how to replace your broken screen.

Make sure to open the back cover easily using the plastic opening tool
  • Make sure to open the back cover easily using the plastic opening tool

Ajouter un commentaire

Remove back cover by prying away from the Kurio. The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides. The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.
  • Remove back cover by prying away from the Kurio.

  • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

Ajouter un commentaire

To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver. To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.
  • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.

Ajouter un commentaire

After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.
  • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

  • All these screws are identical so don't worry if you get them out of order.

Ajouter un commentaire

Remove the plastic cover that is covering the camera area.
  • Remove the plastic cover that is covering the camera area.

Ajouter un commentaire

Separate the two halves of your Kurio Touch 4S and lay them besides each other.
  • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

Ajouter un commentaire

Use Phillips # 1 screw to open the 4 screws on the motherboard.
  • Use Phillips # 1 screw to open the 4 screws on the motherboard.

  • Open the screws gently and do not apply too much force as you could damage the motherboard.

Ajouter un commentaire

Use the plastic opener to remove the battery.
  • Use the plastic opener to remove the battery.

Ajouter un commentaire

Use tweezers to remove the black tape that is attached to the motherboard.
  • Use tweezers to remove the black tape that is attached to the motherboard.

Ajouter un commentaire

Detach all the wire that are connected to the motherboard. Also remove the camera module and other components that are attached to the motherboard.
  • Detach all the wire that are connected to the motherboard.

  • Also remove the camera module and other components that are attached to the motherboard.

  • For more information on soldering Click here

Ajouter un commentaire

Remove the motherboard with the help of plastic opener.
  • Remove the motherboard with the help of plastic opener.

  • Detach the power plug before you remove the motherboard.

Ajouter un commentaire

Use the Plastic opener to remove the screen.
  • Use the Plastic opener to remove the screen.

  • Do not apply too much pressure as the front cover could be damaged.

Ajouter un commentaire

Use the soldering tool to remove the wire that is attached to the screen & the motherboard.
  • Use the soldering tool to remove the wire that is attached to the screen & the motherboard.

Ajouter un commentaire

Use tweezers to remove the screen from your Kurio Toich 4S.
  • Use tweezers to remove the screen from your Kurio Toich 4S.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Ali

Membre depuis le 21/01/2015

163 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 6-5, Brown Winter 2015 Membre de l'équipe USF Tampa, Team 6-5, Brown Winter 2015

USFT-BROWN-W15S6G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 1,111