Introduction

This guide will teach you how to replace the charging dock in your LG G Vista. In this guide you will need tweezers, and a spudger.

Make sure the device is powered off.
  • Make sure the device is powered off.

Ajouter un commentaire

Remove the back cover by gently prying open the case of the device from the charging port.
  • Remove the back cover by gently prying open the case of the device from the charging port.

Ajouter un commentaire

Lift the battery out of its place by prying up from the small notch at the base of the battery.
  • Lift the battery out of its place by prying up from the small notch at the base of the battery.

Ajouter un commentaire

Using a Phillips #000 screwdriver, remove the eleven 3.0 mm screws around the perimeter of the phone.
  • Using a Phillips #000 screwdriver, remove the eleven 3.0 mm screws around the perimeter of the phone.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Use a plastic spudger, or finger nail, to lift up the hard shell on the top of the phone.
  • Use a plastic spudger, or finger nail, to lift up the hard shell on the top of the phone.

Ajouter un commentaire

Use a Phillips #000 screwdriver to remove the five 3.0 mm screws. Remove the bottom hard shell from the device.
  • Use a Phillips #000 screwdriver to remove the five 3.0 mm screws.

  • Remove the bottom hard shell from the device.

Ajouter un commentaire

Using a Phillips #000 screwdriver, remove the two screws from the device. Using a Phillips #000 screwdriver, remove the two screws from the device.
  • Using a Phillips #000 screwdriver, remove the two screws from the device.

Ajouter un commentaire

Using a pair of tweezers, lift up the two antennas surrounding the battery.
  • Using a pair of tweezers, lift up the two antennas surrounding the battery.

Ajouter un commentaire

Disconnect the two connectors on the right side of the charging port.
  • Disconnect the two connectors on the right side of the charging port.

Ajouter un commentaire

Lift up the charging port with the plastic opening tool.
  • Lift up the charging port with the plastic opening tool.

  • Remove the charging port from the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Key Baker

Membre depuis le 18/01/2018

676 Réputation

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 13

Total : 71