Introduction

This guide will teach you how to replace the screen on your LG G Vista. The screen of the device won't physically detach, and you will be left with the entire display assembly instead.

Make sure the device is powered off.
  • Make sure the device is powered off.

Ajouter un commentaire

Remove the back cover by gently prying open the case of the device from the charging port.
  • Remove the back cover by gently prying open the case of the device from the charging port.

Ajouter un commentaire

Lift the battery out of its place by prying up from the small notch at the base of the battery.
  • Lift the battery out of its place by prying up from the small notch at the base of the battery.

Ajouter un commentaire

Using a Phillips #000 screwdriver, remove all eleven 3.0 mm screws from around the perimeter of the phone.
  • Using a Phillips #000 screwdriver, remove all eleven 3.0 mm screws from around the perimeter of the phone.

Ajouter un commentaire

Use a plastic spudger or opening tool and run it along the seam of the upper cover.
  • Use a plastic spudger or opening tool and run it along the seam of the upper cover.

  • Carefully remove the cover from the device.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Use the same method to pry off the hard shell covering at the bottom.
  • Use the same method to pry off the hard shell covering at the bottom.

Ajouter un commentaire

Remove the two 1 mm Phillips #000 screws.
  • Remove the two 1 mm Phillips #000 screws.

Ajouter un commentaire

Gently using tweezers, disconnect the connector that is on the bottom right. Gently using tweezers, disconnect the connector that is on the bottom right.
  • Gently using tweezers, disconnect the connector that is on the bottom right.

Ajouter un commentaire

Gently unplug the antenna wires on the bottom left and right sides of the device. Gently unplug the antenna wires on the bottom left and right sides of the device.
  • Gently unplug the antenna wires on the bottom left and right sides of the device.

Ajouter un commentaire

With your plastic opening tool, gently lift up the bottom edge of the exposed charging port, sliding along the edge until it lifts out.
  • With your plastic opening tool, gently lift up the bottom edge of the exposed charging port, sliding along the edge until it lifts out.

Ajouter un commentaire

Using tweezers, unplug the four connectors.
  • Using tweezers, unplug the four connectors.

Ajouter un commentaire

Remove the antenna wires on both sides of the device. Remove the antenna wires on both sides of the device.
  • Remove the antenna wires on both sides of the device.

Ajouter un commentaire

Carefully lift out the back camera from the device. Lift out the headphone jack in the upper right side of the device.
  • Carefully lift out the back camera from the device.

  • Lift out the headphone jack in the upper right side of the device.

Ajouter un commentaire

Remove the motherboard from the phone.
  • Remove the motherboard from the phone.

Ajouter un commentaire

Remove the vibration motor from the device.
  • Remove the vibration motor from the device.

  • You will be left with the entire display assembly of the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these steps in reverse order.

Key Baker

Membre depuis le 18/01/2018

676 Réputation

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 12

Total : 69