Introduction

This guide will walk you through the process of replacing a screen in an LG Phoenix 2. This guide should be used if the screen is cracked. The guide should also be used if the screen does not respond to your touch.

Place a fingernail in the notch at the bottom edge of the phone. Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge. Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.
  • Place a fingernail in the notch at the bottom edge of the phone.

  • Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.

Ajouter un commentaire

Place a fingernail in the notch at the bottom edge of the battery. Pull the battery out. Pull the battery out.
  • Place a fingernail in the notch at the bottom edge of the battery.

  • Pull the battery out.

Ajouter un commentaire

Locate the SIM card in the top right corner on the back of the phone. Remove the SIM card by pushing it with your thumb from left to right.
  • Locate the SIM card in the top right corner on the back of the phone.

  • Remove the SIM card by pushing it with your thumb from left to right.

Ajouter un commentaire

Remove all 9 screws on the back by using a Phillips head #00 screwdriver. To remove the screws rotate them counterclockwise. To remove the screws rotate them counterclockwise.
  • Remove all 9 screws on the back by using a Phillips head #00 screwdriver.

  • To remove the screws rotate them counterclockwise.

Ajouter un commentaire

Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone). Pry the bottom shield to separate it from the phone. Once it is loose you should be able to remove it with your hand.
  • Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone).

  • Pry the bottom shield to separate it from the phone.

  • Once it is loose you should be able to remove it with your hand.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Insert the flat end of the Spudger between the screen and the chromed frame. Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield. Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.
  • Insert the flat end of the Spudger between the screen and the chromed frame.

  • Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.

Ajouter un commentaire

Insert the flat end of the Spudger or the plastic opening tool underneath the camera connector. Gently lever the camera connector free. Once disconnected, take the camera out.
  • Insert the flat end of the Spudger or the plastic opening tool underneath the camera connector.

  • Gently lever the camera connector free.

  • Once disconnected, take the camera out.

Ajouter un commentaire

The front camera can be removed in a similar way as the rear camera. See previous step. The front camera can be removed in a similar way as the rear camera. See previous step. The front camera can be removed in a similar way as the rear camera. See previous step.
  • The front camera can be removed in a similar way as the rear camera. See previous step.

Ajouter un commentaire

Remove the speaker using the Spudger. Remove the speaker using the Spudger. Remove the speaker using the Spudger.
  • Remove the speaker using the Spudger.

Ajouter un commentaire

Remove the screen connector using the Spudger. Remove the screen connector using the Spudger. Remove the screen connector using the Spudger.
  • Remove the screen connector using the Spudger.

Ajouter un commentaire

Using a Spudger, separate the motherboard from the back frame. Using a Spudger, separate the motherboard from the back frame.
  • Using a Spudger, separate the motherboard from the back frame.

Ajouter un commentaire

Heat the screen up using a heat gun (or the IOpener) to loosen up the screen. The heat gun needs to be moved around the edges of the phone in order to equally heat the edges. Heat the screen up using a heat gun (or the IOpener) to loosen up the screen. The heat gun needs to be moved around the edges of the phone in order to equally heat the edges.
  • Heat the screen up using a heat gun (or the IOpener) to loosen up the screen. The heat gun needs to be moved around the edges of the phone in order to equally heat the edges.

Ajouter un commentaire

Pick the Jimmy and slide it's blade around the edge of the screen. Separate the screen from the frame. Separate the screen from the frame.
  • Pick the Jimmy and slide it's blade around the edge of the screen.

  • Separate the screen from the frame.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Esteban Ruibal

Membre depuis le 14/02/2018

666 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S2-G2, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S2-G2, Eyestone Spring 2018

USFT-EYESTONE-S18S2G2

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 12

30 derniers jours : 61

Total : 100