Introduction

This guide will demonstrate the replacement of an LG Rebel Motherboard. Use caution during disassembly as parts are small and can be lost or broken.

Insert the plastic opening tool into the small groove on the side of the phone. Remove the back cover with the plastic opening tool.
  • Insert the plastic opening tool into the small groove on the side of the phone.

  • Remove the back cover with the plastic opening tool.

Ajouter un commentaire

Insert the metal spudger into the small groove on the back of the phone. Lift and remove the black plastic covering with the metal spudger. Lift and remove the black plastic covering with the metal spudger.
  • Insert the metal spudger into the small groove on the back of the phone.

  • Lift and remove the black plastic covering with the metal spudger.

Ajouter un commentaire

Use the metal spudger to lift the remaining black plastic cover pieces. Use the metal spudger to lift the remaining black plastic cover pieces.
  • Use the metal spudger to lift the remaining black plastic cover pieces.

Ajouter un commentaire

Use the metal spudger to lift and disconnect the two connective pieces on the back of the phone. Use the metal spudger to lift and disconnect the two connective pieces on the back of the phone. Use the metal spudger to lift and disconnect the two connective pieces on the back of the phone.
  • Use the metal spudger to lift and disconnect the two connective pieces on the back of the phone.

Ajouter un commentaire

Flip the phone, so that the screen is facing upwards. Slide the metal spudger along the perimeter of the phone in order to break the entire seal. Use the suction cup to lift and remove the screen.
  • Flip the phone, so that the screen is facing upwards.

  • Slide the metal spudger along the perimeter of the phone in order to break the entire seal.

  • Use the suction cup to lift and remove the screen.

Ajouter un commentaire

Use the metal spudger to slide the black bumper out from the bottom of the phone. Use the metal spudger to slide the black bumper out from the bottom of the phone.
  • Use the metal spudger to slide the black bumper out from the bottom of the phone.

Ajouter un commentaire

Use the metal spudger to carefully loosen the motherboard from the body of the phone. Slowly slide the motherboard out of the body of the phone. Remove the motherboard.
  • Use the metal spudger to carefully loosen the motherboard from the body of the phone.

  • Slowly slide the motherboard out of the body of the phone.

  • Remove the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Justin Franklin

Membre depuis le 08/02/2018

145 Réputation

1 tutoriel rédigé

Équipe

Sam Houston State, Team S16-G2, Nardone Spring 2018 Membre de l'équipe Sam Houston State, Team S16-G2, Nardone Spring 2018

SHSU-NARDONE-S18S16G2

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 20

Total : 25