Introduction

This guide illustrates how to replace the LG VX5300 keypad.

Pièces

Aucune pièce nécessaire.

Carefully slide battery cover off in a downward direction. Using the plastic opening tool, remove the battery. Light force may be necessary. Using the plastic opening tool, remove the battery. Light force may be necessary.
  • Carefully slide battery cover off in a downward direction.

  • Using the plastic opening tool, remove the battery. Light force may be necessary.

Ajouter un commentaire

Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.
  • Using a Phillips #0 screwdriver, remove the five screws from the back cover and carefully set them aside.

Ajouter un commentaire

Using the plastic opening tool, carefully lift the back cover off.
  • Using the plastic opening tool, carefully lift the back cover off.

Ajouter un commentaire

Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars. Look to the following photo for the location of the two sensor bars.
  • Before touching anything inside the phone: it is crucial that you are very cautious when working around the wiring and sensor bars.

  • Look to the following photo for the location of the two sensor bars.

  • Without disconnecting the orange wire, carefully flip the computer chip over and lay flat on the table, exposing the keypad.

Ajouter un commentaire

Carefully remove the keypad and replace with the new keypad. If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.
  • Carefully remove the keypad and replace with the new keypad.

  • If sensor bars behind the volume and camera buttons fall out, gently put them back in place behind the buttons.

Ajouter un commentaire

Carefully set the computer chip back in place.
  • Carefully set the computer chip back in place.

Ajouter un commentaire

Place the back cover back on and secure it with the screws. Place the back cover back on and secure it with the screws.
  • Place the back cover back on and secure it with the screws.

Ajouter un commentaire

Insert the battery. Slide the back cover on the phone.
  • Insert the battery.

  • Slide the back cover on the phone.

Ajouter un commentaire

Ligne d'arrivée

Ashley

Membre depuis le 12/02/2013

9 Réputation

3 tutoriels rédigés

Équipe

Ohio State, Team 1-1, Buehl Spring 2013 Membre de l'équipe Ohio State, Team 1-1, Buehl Spring 2013

OSU-BUEHL-S13S1G1

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 422