Introduction

This part of the laptop allows access to most components that the other guides replace. This is a necessary step to complete in order to replace those further components. Underneath the back cover you will find the motherboard, hard drive, RAM, and processor.

Pièces

Aucune pièce nécessaire.

Turn the laptop over so that the bottom side is facing up.
  • Turn the laptop over so that the bottom side is facing up.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Unscrew the five 5mm Phillips #0 screws that hold the cover in place.
  • Unscrew the five 5mm Phillips #0 screws that hold the cover in place.

    • The screws do not come out fully from the back plate. They stay attached to the plate itself.

Ajouter un commentaire

With the screws removed, insert the plastic opening tool into the groove located on the right side. Begin to pry up, and the plate should lift up from the body of the laptop. While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.
  • With the screws removed, insert the plastic opening tool into the groove located on the right side.

  • Begin to pry up, and the plate should lift up from the body of the laptop.

  • While lifting up, take the piece in one hand and pull up and to the right to fully remove the back plate.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Justin Bickford

Membre depuis le 01/03/2018

284 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team S1-G1, Simcock Spring 2018 Membre de l'équipe UMass Dartmouth, Team S1-G1, Simcock Spring 2018

UMASSD-SIMCOCK-S18S1G1

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 11

Total : 44