Introduction

Replacing the screen is a quick and easy task. Removing the screen only takes three tools: A JIS #0 screwdriver, a plastic opening tool, and a spudger. Before you start make sure you remove the battery and unplug the device.

Pièces

Aucune pièce nécessaire.

At the top of the laptop you will see two switches, like in image one and two. Pull the switches outwards with your thumb, towards the unlocked lock. Pull the switches outwards with your thumb, towards the unlocked lock.
  • At the top of the laptop you will see two switches, like in image one and two.

  • Pull the switches outwards with your thumb, towards the unlocked lock.

Ajouter un commentaire

Once both switches are pulled, the battery should pop out. Once both switches are pulled, the battery should pop out. Once both switches are pulled, the battery should pop out.
  • Once both switches are pulled, the battery should pop out.

Ajouter un commentaire

Now you are ready to insert your new battery.
  • Now you are ready to insert your new battery.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Use the plastic opening tool to pry the plastic away from the screen. Use the plastic opening tool to pry the plastic away from the screen.
  • Use the plastic opening tool to pry the plastic away from the screen.

Ajouter un commentaire

Carefully unsnap the front plastic piece to expose the frame of the screen. Carefully unsnap the front plastic piece to expose the frame of the screen.
  • Carefully unsnap the front plastic piece to expose the frame of the screen.

Ajouter un commentaire

Unscrew the four 7mm screws located on all four corners of the frame using a JIS #0 screwdriver. Carefully lift the screen from the base so as to not damage it. Carefully lift the screen from the base so as to not damage it.
  • Unscrew the four 7mm screws located on all four corners of the frame using a JIS #0 screwdriver.

  • Carefully lift the screen from the base so as to not damage it.

Ajouter un commentaire

Slowly remove the sticker connected to the rear of the screen using a spudger. Carefully disconnect the screen from the base of the laptop.
  • Slowly remove the sticker connected to the rear of the screen using a spudger.

  • Carefully disconnect the screen from the base of the laptop.

Ajouter un commentaire

Now you have removed the screen and are ready to install a new one.
  • Now you have removed the screen and are ready to install a new one.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jimmy McClenan

Membre depuis le 08/02/2018

121 Réputation

1 tutoriel rédigé

Équipe

Sam Houston State, Team S16-G4, Nardone Spring 2018 Membre de l'équipe Sam Houston State, Team S16-G4, Nardone Spring 2018

SHSU-NARDONE-S18S16G4

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 10

30 derniers jours : 46

Total : 66