Introduction

The stand base on this computer stops the back cover from being removed, preventing you from accessing the components inside. No tools are needed for this, as it is designed to be screwed and unscrewed by hand.

Outils

Pièces

Aucune pièce nécessaire.

Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
  • Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.

  • Make sure that the work surface is flat and has nothing sharp on it.

Ajouter un commentaire

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the monitor stand screw in the bottom of the stand, and remove the stand completely. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.
  • Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jackson Blake

Membre depuis le 22/01/2018

805 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team S16-G3, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S16-G3, Banghart Winter 2018

CPSU-BANGHART-W18S16G3

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 34

Total : 95