Introduction

Replacing the battery on the Lenovo Ideapad Flex4-1130 is a relatively simple task with minimal risk of damaging the device. The battery might need replacement if your device is unable to remain on for very long even after being fully charged.

Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.
  • Power off your Lenovo Ideapad Flex4-1130 before beginning disassembly.

  • Remove the ten 4mm screws from the back panel.

Ajouter un commentaire

Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.
  • Insert the spudger into the groove work your way around the laptop to separate the bottom from the case.

  • Do not insert the spudger too deep! This could potentially damage a device part.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove the connector attaching the battery to the motherboard.
  • Remove the connector attaching the battery to the motherboard.

Ajouter un commentaire

Remove the four 4mm screws on the battery.
  • Remove the four 4mm screws on the battery.

Ajouter un commentaire

Lift the battery with a spudger and remove.
  • Lift the battery with a spudger and remove.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adrian Miranda

Membre depuis le 15/02/2018

677 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S17-G5, Boczar Spring 2018 Membre de l'équipe USF Tampa, Team S17-G5, Boczar Spring 2018

USFT-BOCZAR-S18S17G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 16

Total : 51