Introduction

Lenovo ThinkPad Edge E530, E530c - how to replace / upgrade the Processor.

_________________________________________________

Vidéo d'introduction

Switch-off the Laptop and remove the battery. The HDD/Memory Cover is held by 3x Phillips screws. Remove them. Remove the Cover.
  • Switch-off the Laptop and remove the battery.

  • The HDD/Memory Cover is held by 3x Phillips screws. Remove them.

  • Remove the Cover.

Ajouter un commentaire

Disconnect the Fan cable. Remove the 2x screws from the Fan module. Unscrew 4x screws around the processor.
  • Disconnect the Fan cable.

  • Remove the 2x screws from the Fan module.

  • Unscrew 4x screws around the processor.

  • Carefully lift the Cooling System.

Ajouter un commentaire

Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound. If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off. Separate the Fan from the Heat-sink.
  • Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound.

  • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off.

  • Separate the Fan from the Heat-sink.

Ajouter un commentaire

Use a soft anti static brush and clean the Heat-sink on the inside.
  • Use a soft anti static brush and clean the Heat-sink on the inside.

  • Before installing a new Cooling System or reinstalling the old one, you must clean the processor from the old thermal compound and put a new one.

Ajouter un commentaire

Clean the old thermal compound. Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound. If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off. To remove the Processor, turn the CPU socket screw 90 degrees to open the socket.
  • Clean the old thermal compound. Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound.

  • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off.

  • To remove the Processor, turn the CPU socket screw 90 degrees to open the socket.

  • Lift the Processor from the socket.

  • Be careful to lift straight up without bending the CPU pins.

Ajouter un commentaire

Before you place the new Processor, be sure the socket screw is in the open position. Delicately place the Processor into the socket.
  • Before you place the new Processor, be sure the socket screw is in the open position.

  • Delicately place the Processor into the socket.

  • Close the socket with the socket screw.

  • Put thermal compound on the processor surface and carefully install back the Cooling system.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

ZFix

Membre depuis le 09/12/2013

153 600 Réputation

430 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

277 membres

724 tutoriels rédigés

Bonjour, peut-on remplacer le CPU par n'importe quel autre plus puissant, ou y a-t-il des restrictions ?

francoislaurent - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 47

Total : 3,367