Lenovo ThinkPad X280 Keyboard Replacement

Introduction

This replacement guide will inform users about how to properly remove the keyboard from the Lenovo ThinkPad X280.

The keyboard allows the user to type one or multiple keys and interact with the screen functions of the computer.

If the device is missing a keyboard letter, demonstrating an inability to type, or failing to press down, there may be an external issue with your device’s keyboard.

It is important to note that a keyboard key can vary in size and function according to the device. Therefore, using shortcuts or inadequate keys can result in poor results.

To view an additional guide to replace your keyboard, you can use this resource.

Ce dont vous avez besoin

Étape 1 Keyboard

Lenovo ThinkPad X280 Keyboard Replacement, Keyboard: étape 1, image 1 de 1

To begin, ensure that the device is powered off and not plugged into a energy supply.
Open the device to where you are directly viewing the screen with the keyboard laying flat.

Traduire

Étape 2

Using the flat end of the spudger, insert it at the top of the right click button.
Pry it up to remove the button.
Repeat for the left click button.

Traduire

Étape 3

Use the Phillips #0 screwdriver to remove the two 5 mm screws.

Traduire

Étape 4

Using the black spudger tool, gently lift under the plastic where the screws were located.
Slide the keyboard towards the screen of the LenovoThinkPad X280 and lift the front edge by hand.

Traduire

Étape 5

Gently remove the keyboard from the device and flip it over.
It should still be attached with connectors on the far left corner at the top so be careful not to rip or pull the keyboard out.

Traduire