Introduction

If your battery is not functioning properly, this guide will highlight the steps on how to replace it.

Pièces

Aucune pièce nécessaire.

Ensure the device is off and unplugged.
  • Ensure the device is off and unplugged.

  • Remove the stylus from its port and set aside.

Ajouter un commentaire

Using a Phillips screwdriver, unscrew the 8 PH1 Phillips fasteners until you hear an audible click. The screws will not separate from the bottom cover when loose.
  • Using a Phillips screwdriver, unscrew the 8 PH1 Phillips fasteners until you hear an audible click.

  • The screws will not separate from the bottom cover when loose.

Ajouter un commentaire

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
The bottom cover is attached via several plastic clips located around the edges of the bottom cover. Using a plastic opening tool, gently pry the bottom cover from the laptop.
  • The bottom cover is attached via several plastic clips located around the edges of the bottom cover.

  • Using a plastic opening tool, gently pry the bottom cover from the laptop.

  • Work the plastic opening tool around the edges of the bottom cover undoing all of the plastic clips, as shown in the picture.

Ajouter un commentaire

Place your fingers around the edges of the cover and remove it. Place your fingers around the edges of the cover and remove it.
  • Place your fingers around the edges of the cover and remove it.

Ajouter un commentaire

Fold back the plastic cover to access the battery connection. Remove the battery connection using your two index fingers. Gently separate the connectors.
  • Fold back the plastic cover to access the battery connection.

  • Remove the battery connection using your two index fingers.

    • Gently separate the connectors.

Ajouter un commentaire

Unscrew the two battery PH1 Phillips fasteners and set them aside. Lift the battery free from its mounting and remove it. Lift the battery free from its mounting and remove it.
  • Unscrew the two battery PH1 Phillips fasteners and set them aside.

  • Lift the battery free from its mounting and remove it.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Daniel Fernandez

Membre depuis le 14/02/2018

616 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S2-G3, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S2-G3, Eyestone Spring 2018

USFT-EYESTONE-S18S2G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 6

7 derniers jours : 17

30 derniers jours : 47

Total : 110