Introduction

If, after reading through this guide, you are still in need of assistance, please refer back to the device page or the troubleshooting page.

Pièces

Aucune pièce nécessaire.

Unfold the antennas straight away from the device.
  • Unfold the antennas straight away from the device.

Ajouter un commentaire

Remove the black caps from the antennas by pulling them away from the device. Remove the black caps from the antennas by pulling them away from the device. Remove the black caps from the antennas by pulling them away from the device.
  • Remove the black caps from the antennas by pulling them away from the device.

Ajouter un commentaire

Unscrew each of the antennas from the wireless device. Unscrew each of the antennas from the wireless device. Unscrew each of the antennas from the wireless device.
  • Unscrew each of the antennas from the wireless device.

Ajouter un commentaire

Using a bit of force, remove the blue plastic case. Using a bit of force, remove the blue plastic case.
  • Using a bit of force, remove the blue plastic case.

Ajouter un commentaire

To remove the black casing that surrounds the green motherboard, slide the top half of the casing backwards. It only moves a very short distance. Pull the top piece upwards and away from the bottom to remove.
  • To remove the black casing that surrounds the green motherboard, slide the top half of the casing backwards. It only moves a very short distance.

  • Pull the top piece upwards and away from the bottom to remove.

Ajouter un commentaire

Locate the 2 M2.5x6mm screws that attach the motherboard to the back case. Remove the two screws from the motherboard as indicated with the Phillips head screwdriver.
  • Locate the 2 M2.5x6mm screws that attach the motherboard to the back case.

  • Remove the two screws from the motherboard as indicated with the Phillips head screwdriver.

Ajouter un commentaire

Once screws have been removed, slide the motherboard in the direction of its LED lights.
  • Once screws have been removed, slide the motherboard in the direction of its LED lights.

  • Lift motherboard up and away from the black lower casing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Aaron Brown

Membre depuis le 11/10/2011

163 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 17-7, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-7, Regan Fall 2011

CPSU-REGAN-F11S17G7

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 12

Total : 2,917