Introduction

This guide will help you adjust the scrollability of the mouse's scroll wheel by replacing the spring.

Use a blue spudger to pry off all 4 mouse feet from under of mouse.
  • Use a blue spudger to pry off all 4 mouse feet from under of mouse.

Ajouter un commentaire

Use a Phillips #00 screwdriver to unscrew all 6 screws (3x5mm ) from under the mouse feet.
  • Use a Phillips #00 screwdriver to unscrew all 6 screws (3x5mm ) from under the mouse feet.

Ajouter un commentaire

Lift the top of the mouse from the base of the mouse (separate the mouse in half) to expose the internal hardware. Lift the top of the mouse from the base of the mouse (separate the mouse in half) to expose the internal hardware.
  • Lift the top of the mouse from the base of the mouse (separate the mouse in half) to expose the internal hardware.

Ajouter un commentaire

Use the black spudger to move the tip of the metal spring off of the wheel.
  • Use the black spudger to move the tip of the metal spring off of the wheel.

  • The scroll wheel will not actually be removed — instead, the adjustment to the metal spring will test the wheel's usability.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jerico Morales

Membre depuis le 17/01/2018

531 Réputation

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 10

30 derniers jours : 12

Total : 46