Introduction

This guide will show you how to properly replace the speaker for the the Mattel Loopz interactive game.

Use a No. 2 Phillips head screwdriver to take out the 1/4" screw that holds the battery cover in place on the bottom of the device.
  • Use a No. 2 Phillips head screwdriver to take out the 1/4" screw that holds the battery cover in place on the bottom of the device.

Ajouter un commentaire

Take out the 4 AA Batteries.
  • Take out the 4 AA Batteries.

Ajouter un commentaire

Remove red screw covers (13 total) using  spudger.
  • Remove red screw covers (13 total) using spudger.

Ajouter un commentaire

Remove the thirteen 12.7mm screws with a #1 Phillips screwdriver.
  • Remove the thirteen 12.7mm screws with a #1 Phillips screwdriver.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Remove 6 white caps using spudger to reveal screws underneath.
  • Remove 6 white caps using spudger to reveal screws underneath.

Ajouter un commentaire

Remove the six 16mm screws with a #1 Phillips screwdriver.
  • Remove the six 16mm screws with a #1 Phillips screwdriver.

Ajouter un commentaire

Remove the white cover. Be sure to remove the front and the back.
  • Remove the white cover. Be sure to remove the front and the back.

Ajouter un commentaire

Remove the black, plastic cover to reveal the internal electronics as shown.
  • Remove the black, plastic cover to reveal the internal electronics as shown.

Ajouter un commentaire

Remove the two 6.4mm screws with a #1 Phillips screwdriver.
  • Remove the two 6.4mm screws with a #1 Phillips screwdriver.

Ajouter un commentaire

Remove the speaker as shown.
  • Remove the speaker as shown.

Ajouter un commentaire

Use a soldering iron to desolder the red and black speaker wires from the speaker.
  • Use a soldering iron to desolder the red and black speaker wires from the speaker.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Trevor Lasiter

Membre depuis le 08/01/2018

219 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S1-G2, Freund Spring 2018 Membre de l'équipe IUPUI, Team S1-G2, Freund Spring 2018

IUPUI-FREUND-S18S1G2

3 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 34