Introduction

This guide disassembles the capture button, so the device can be checked for a broken spring or for debris blocking its movement.

Pièces

Aucune pièce nécessaire.

Locate and remove the silver screws on each side of the camera. Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws. Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.
  • Locate and remove the silver screws on each side of the camera.

  • Use the Phillips #00 Screwdriver to unscrew all 2.0mm (4 instances) and 4.0mm (2 instances) screws.

Ajouter un commentaire

Then, carefully pry apart the front and back outer casing away from the internal components. Be aware of the ribbon wire that will disconnect when the casing is detached. Be aware of the ribbon wire that will disconnect when the casing is detached.
  • Then, carefully pry apart the front and back outer casing away from the internal components.

  • Be aware of the ribbon wire that will disconnect when the casing is detached.

Ajouter un commentaire

Choosing the front half of the casing, locate the capture button on the top.
  • Choosing the front half of the casing, locate the capture button on the top.

  • Using tweezers, apply pressure to the two black hooks (circled in red) while holding the button down from the outside of the case.

Ajouter un commentaire

The button will spring free. The capture device consists of the plastic button and a small metal spring.
  • The button will spring free. The capture device consists of the plastic button and a small metal spring.

  • The button can be reassembled by using the tweezers to place the spring rectangle-side down on the button and snapping the button back into place.

Ajouter un commentaire

Conclusion

Reassemble the casing by reversing steps 1 and 2.

Megan Milam

Membre depuis le 11/03/2013

28 Réputation

5 tutoriels rédigés

Équipe

Clemson, Team 12-4, Benson Spring 2013 Membre de l'équipe Clemson, Team 12-4, Benson Spring 2013

CLEM-BENSON-S13S12G4

3 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 246