Introduction

This guide will teach you how to remove the Moto Z's speakers.

Position the opening tool under the lid of the screen. Slide the opening tool around the edge of the screen to loosen the adhesive.
  • Position the opening tool under the lid of the screen.

  • Slide the opening tool around the edge of the screen to loosen the adhesive.

Ajouter un commentaire

Lift the screen off the body  from the top.
  • Lift the screen off the body from the top.

Ajouter un commentaire

Kits de RAM Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits de RAM Mac
Obtenez plus de mémoire sur votre Mac.
To disconnect the screen from the body, stick the spudger under one of the corners of the gold tab. Lift up, removing the tab from the device.
  • To disconnect the screen from the body, stick the spudger under one of the corners of the gold tab.

  • Lift up, removing the tab from the device.

Ajouter un commentaire

Pull the screen up to fully remove it.
  • Pull the screen up to fully remove it.

Ajouter un commentaire

Remove the two T4 (1.28mm) Torx screws  holding the speaker down.

Ajouter un commentaire

Lift up and remove the speaker with the spudger. It's best to use the blue iFixit opening tool to pry off the speaker. Metal tools can be dangerous.
  • Lift up and remove the speaker with the spudger.

  • It's best to use the blue iFixit opening tool to pry off the speaker. Metal tools can be dangerous.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Miriam Lam

Membre depuis le 24/01/2018

598 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S2-G2, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S2-G2, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G2

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 10

30 derniers jours : 49

Total : 178