Introduction

This guide will be helpful for when you are having problems with the battery life or charging capability of the phone.

Insert the spudger into the notch on the corner of the phone and lift up to remove the back case. Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.
  • Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.

Ajouter un commentaire

Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.
  • Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.

Ajouter un commentaire

Lift up and remove the back panel. Lift up and remove the back panel. Lift up and remove the back panel.
  • Lift up and remove the back panel.

Ajouter un commentaire

After removing the back panel, use the             spudger to lift and detach the Battery Flux Cable from the Motherboard. After removing the back panel, use the             spudger to lift and detach the Battery Flux Cable from the Motherboard.
  • After removing the back panel, use the spudger to lift and detach the Battery Flux Cable from the Motherboard.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape. Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.
  • Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.

Ajouter un commentaire

Use the T4 Torx Screwdriver to remove the two 3.2 mm screws circled. Use the T4 Torx Screwdriver to remove the two 3.2 mm screws circled.
  • Use the T4 Torx Screwdriver to remove the two 3.2 mm screws circled.

Ajouter un commentaire

Use the Spudger to lift up and remove the Signal Flux Cable, circled in picture, from the Cable Port. The Signal Flux Cable should still be connected to the side of the phone, but detached from the charging port. Use the Spudger to lift up and remove the Signal Flux Cable, circled in picture, from the Cable Port. The Signal Flux Cable should still be connected to the side of the phone, but detached from the charging port. Use the Spudger to lift up and remove the Signal Flux Cable, circled in picture, from the Cable Port. The Signal Flux Cable should still be connected to the side of the phone, but detached from the charging port.
  • Use the Spudger to lift up and remove the Signal Flux Cable, circled in picture, from the Cable Port. The Signal Flux Cable should still be connected to the side of the phone, but detached from the charging port.

Ajouter un commentaire

Use the Spudger to lift up and detach the Main Flex Cable from the Cable Port. Use the Spudger to lift up and detach the Main Flex Cable from the Cable Port. Use the Spudger to lift up and detach the Main Flex Cable from the Cable Port.
  • Use the Spudger to lift up and detach the Main Flex Cable from the Cable Port.

Ajouter un commentaire

Use the Spudger to lift up and detach the Fingerprint Scanner Flux Cable from the Cable Port. Use the Spudger to lift up and detach the Fingerprint Scanner Flux Cable from the Cable Port. Use the Spudger to lift up and detach the Fingerprint Scanner Flux Cable from the Cable Port.
  • Use the Spudger to lift up and detach the Fingerprint Scanner Flux Cable from the Cable Port.

Ajouter un commentaire

Use the Spudger to lift up and remove the Charging Port from the phone. The black box connected to the charging port will lift up with it. Remove the whole piece. Use the Spudger to lift up and remove the Charging Port from the phone. The black box connected to the charging port will lift up with it. Remove the whole piece.
  • Use the Spudger to lift up and remove the Charging Port from the phone. The black box connected to the charging port will lift up with it. Remove the whole piece.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jack Haseman

Membre depuis le 19/03/2018

645 Réputation

6 tutoriels rédigés

Équipe

Baylor, Team S3-G2, Williams Spring 2018 Membre de l'équipe Baylor, Team S3-G2, Williams Spring 2018

BU-WILLIAMS-S18S3G2

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 22

30 derniers jours : 81

Total : 107