Introduction

This guide will focus on disassembling the necessary components for the phone in order to get to the camera hardware and remove it from the motherboard.

Pièces

Aucune pièce nécessaire.

Turn the phone face down.
  • Turn the phone face down.

  • Press and hold the release button in the middle of the back panel.

  • Slide the bottom panel down to remove.

Ajouter un commentaire

Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown. When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.
  • Remove the battery pack by prying it out with a fingernail, screw driver or other opening tool at the tab shown.

  • When reinserting the battery, make sure the contacts in the battery are lined up with the contacts in the phone.

Ajouter un commentaire

Press inward on the upper casing.
  • Press inward on the upper casing.

Ajouter un commentaire

Slide the upper case to the right and lift up.
  • Slide the upper case to the right and lift up.

  • Lift the camera sticker so that it doesn't get damaged.

Ajouter un commentaire

Remove the six labeled screws with a T5 Torx Screwdriver. Remove the six labeled screws with a T5 Torx Screwdriver.
  • Remove the six labeled screws with a T5 Torx Screwdriver.

Ajouter un commentaire

Once the screws are removed, use the plastic opening tool to remove the black casing.
  • Once the screws are removed, use the plastic opening tool to remove the black casing.

Ajouter un commentaire

Remove both screws on the mounted surface with a T5 screwdriver. Remove both screws on the mounted surface with a T5 screwdriver.
  • Remove both screws on the mounted surface with a T5 screwdriver.

Ajouter un commentaire

Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool. Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.
  • Remove the glued, mounted surface by lifting it from underneath the SIM card slot by using the plastic opening tool.

Ajouter un commentaire

Use the plastic opening tool to lift the camera from the phone.
  • Use the plastic opening tool to lift the camera from the phone.

Ajouter un commentaire

The new camera can now be attached to the motherboard.
  • The new camera can now be attached to the motherboard.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jorge Vanegas Moran

Membre depuis le 03/10/2012

8 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 6-31, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-31, Regan Fall 2012

CPSU-REGAN-F12S6G31

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 550