Introduction

Use this repair guide to replace an SD card in a Motorola RAZR2 v9m.

Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

Push the rear cover toward the hinge of the RAZR2.  The panel will slide about 3 mm. Push the rear cover toward the hinge of the RAZR2.  The panel will slide about 3 mm.
  • Push the rear cover toward the hinge of the RAZR2. The panel will slide about 3 mm.

Ajouter un commentaire

Pinch the top and bottom edges of the panel and pull it away from the RAZR2. The rear panel uses four small hooks to hold it in place.  If the panel will not easily pull away, slide the panel more toward the hinge. The rear panel uses four small hooks to hold it in place.  If the panel will not easily pull away, slide the panel more toward the hinge.
  • Pinch the top and bottom edges of the panel and pull it away from the RAZR2.

  • The rear panel uses four small hooks to hold it in place. If the panel will not easily pull away, slide the panel more toward the hinge.

Ajouter un commentaire

Gently pull the white plastic tab to lift the battery away from the RAZR2. The white plastic tab is attached to the phone.  Only pull it enough to expose the edges of the battery.
  • Gently pull the white plastic tab to lift the battery away from the RAZR2.

  • The white plastic tab is attached to the phone. Only pull it enough to expose the edges of the battery.

Ajouter un commentaire

To remove the battery, grasp its edges pull away from the phone. When installing a new battery, be sure the metal contacts on the phone line up with the ones on the battery.
  • To remove the battery, grasp its edges pull away from the phone.

  • When installing a new battery, be sure the metal contacts on the phone line up with the ones on the battery.

Ajouter un commentaire

Press the exposed portion of the SD card towards the bottom of the phone until you hear a click. The SD card will slide into the phone about 10 mm. Press the exposed portion of the SD card towards the bottom of the phone until you hear a click. The SD card will slide into the phone about 10 mm.
  • Press the exposed portion of the SD card towards the bottom of the phone until you hear a click. The SD card will slide into the phone about 10 mm.

Ajouter un commentaire

Release the SD card. A spring will push it partially out of the phone. Grasp the card by the edges and remove.
  • Release the SD card. A spring will push it partially out of the phone.

  • Grasp the card by the edges and remove.

  • When installing a new SD card, remember that it must be 2 GB or less.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

John T Roller

Membre depuis le 04/06/2013

746 Réputation

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 450