Pièces

Aucune pièce nécessaire.

Push down on the black tab located at the top center of the Motorola phone.
  • Push down on the black tab located at the top center of the Motorola phone.

Ajouter un commentaire

Remove the battery by pulling the battery from the top center.
  • Remove the battery by pulling the battery from the top center.

Ajouter un commentaire

Remove the four (4) T6 Torx screws from the back of the metal back plate.
  • Remove the four (4) T6 Torx screws from the back of the metal back plate.

Ajouter un commentaire

Insert the flat end of a spudger and pry the metal cover up off the phone. Insert the flat end of a spudger and pry the metal cover up off the phone.
  • Insert the flat end of a spudger and pry the metal cover up off the phone.

Ajouter un commentaire

Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger. Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.
  • Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.

Ajouter un commentaire

Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard. De-route the antenna cable by pulling it out.
  • Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard.

  • De-route the antenna cable by pulling it out.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jorge Trujillo

Membre depuis le 19/05/2011

471 Réputation

4 tutoriels rédigés

Équipe

CSU Los Angeles, Team 1-1, Nelson Spring 2011 Membre de l'équipe CSU Los Angeles, Team 1-1, Nelson Spring 2011

CSULA-NELSON-S11S1G1

2 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 2,703