Pièces

Aucune pièce nécessaire.

Turn the front of the camera toward you.
  • Turn the front of the camera toward you.

Ajouter un commentaire

On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.
  • On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.

Ajouter un commentaire

On the right side of the camera, remove the first visible screw.
  • On the right side of the camera, remove the first visible screw.

Ajouter un commentaire

Lift the HDMI and A/V OUT cover to access the hidden screw and remove.
  • Lift the HDMI and A/V OUT cover to access the hidden screw and remove.

Ajouter un commentaire

Flip the camera upside down and remove the seven marked screws.
  • Flip the camera upside down and remove the seven marked screws.

Ajouter un commentaire

Remove the two screws hidden underneath the display panel. Remove the two screws hidden underneath the display panel.
  • Remove the two screws hidden underneath the display panel.

Ajouter un commentaire

Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera.
  • Use a plastic opening tool to gently loosen up the sides of the camera.

Ajouter un commentaire

Carefully open the camera. There are two ribbon cables when opening the camera. Make sure to properly detach them before proceeding. Disassembling Nikon Coolpix P100 Ribbon Cable

Ajouter un commentaire

Now you have partial access to the camera's motherboard.
  • Now you have partial access to the camera's motherboard.

  • Remove the five indicated screws that are attached to the metal plate.

Ajouter un commentaire

Remove the hidden top screw that is attached to the metal plate.
  • Remove the hidden top screw that is attached to the metal plate.

Ajouter un commentaire

Use a plastic opening tool to carefully loosen the metal plate. Remove the panel to access the camera's motherboard. Remove the panel to access the camera's motherboard.
  • Use a plastic opening tool to carefully loosen the metal plate.

  • Remove the panel to access the camera's motherboard.

Ajouter un commentaire

Now you have access to the camera's motherboard
  • Now you have access to the camera's motherboard

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rikki Brown

Membre depuis le 09/01/2015

243 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 1-1, Tanski Winter 2015 Membre de l'équipe USF Tampa, Team 1-1, Tanski Winter 2015

USFT-TANSKI-W15S1G1

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 18

Total : 837