Introduction

The zoom unit/shutter component located inside the main body of the camera under the motherboard will need to be replaced if non-functional.

Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit). Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).
  • Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

Ajouter un commentaire

Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera. Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.
  • Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

Ajouter un commentaire

Unscrew all 6 visible screws that secure the motherboard into place using a Phillips head screwdriver (found in iFixit tool kit).
  • Unscrew all 6 visible screws that secure the motherboard into place using a Phillips head screwdriver (found in iFixit tool kit).

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Pull the shown panel off of the motherboard to expose the Image sensor connection
  • Pull the shown panel off of the motherboard to expose the Image sensor connection

Ajouter un commentaire

Lift tab up to remove the Image sensor connection strip.
  • Lift tab up to remove the Image sensor connection strip.

Ajouter un commentaire

Pull the gray panels back to allow the hidden micro usb and hdmi insert connectors to come free. Use a Metal Spudger to help with the process to get these connectors free from the frame. Use a Metal Spudger to help with the process to get these connectors free from the frame.
  • Pull the gray panels back to allow the hidden micro usb and hdmi insert connectors to come free.

    • Use a Metal Spudger to help with the process to get these connectors free from the frame.

Ajouter un commentaire

Using a Metal Spudger, lift the motherboard up from the body of the camera. Using a Metal Spudger, lift the motherboard up from the body of the camera.
  • Using a Metal Spudger, lift the motherboard up from the body of the camera.

Ajouter un commentaire

Pull the motherboard off of the main body of the camera. Pull the motherboard off of the main body of the camera.
  • Pull the motherboard off of the main body of the camera.

Ajouter un commentaire

Use a plastic opening tool of your choice to loosen and pry up the zoom unit/shutter component. Use your hands to manually lift the zoom unit/shutter component up and out of the main body of the camera. Use your hands to manually lift the zoom unit/shutter component up and out of the main body of the camera.
  • Use a plastic opening tool of your choice to loosen and pry up the zoom unit/shutter component.

  • Use your hands to manually lift the zoom unit/shutter component up and out of the main body of the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Erik Knapton

Membre depuis le 30/01/2018

207 Réputation

2 tutoriels rédigés

Équipe

Baylor, Team S2-G6, Johnson Spring 2018 Membre de l'équipe Baylor, Team S2-G6, Johnson Spring 2018

BU-JOHNSON-S18S2G6

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 31