Aller au contenu principal

Nintendo DSi XL Stylus Housing Replacement

Ce dont vous avez besoin

  1. Nintendo DSi XL Stylus Housing Replacement, Battery: étape 1, image 1 de 2 Nintendo DSi XL Stylus Housing Replacement, Battery: étape 1, image 2 de 2
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

  2. Nintendo DSi XL Stylus Housing Replacement: étape 2, image 1 de 1
    • Lift the battery from the DSi XL.

  3. Nintendo DSi XL Stylus Housing Replacement, Lower Case: étape 3, image 1 de 3 Nintendo DSi XL Stylus Housing Replacement, Lower Case: étape 3, image 2 de 3 Nintendo DSi XL Stylus Housing Replacement, Lower Case: étape 3, image 3 de 3
    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

  4. Nintendo DSi XL Stylus Housing Replacement: étape 4, image 1 de 1
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

  5. Nintendo DSi XL Stylus Housing Replacement: étape 5, image 1 de 3 Nintendo DSi XL Stylus Housing Replacement: étape 5, image 2 de 3 Nintendo DSi XL Stylus Housing Replacement: étape 5, image 3 de 3
    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

  6. Nintendo DSi XL Stylus Housing Replacement: étape 6, image 1 de 2 Nintendo DSi XL Stylus Housing Replacement: étape 6, image 2 de 2
    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

  7. Nintendo DSi XL Stylus Housing Replacement: étape 7, image 1 de 2 Nintendo DSi XL Stylus Housing Replacement: étape 7, image 2 de 2
    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

  8. Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: étape 8, image 1 de 3 Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: étape 8, image 2 de 3 Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: étape 8, image 3 de 3
    • Remove the two gold 4.0 mm Phillips screws securing the right shoulder button assembly to the back case.

    • Lift the right shoulder button assembly from the back case.

    • The components of the right shoulder button assembly:

    • Right shoulder button

    • Shoulder button spring

    • Retaining pin

    • Right shoulder button holding panel

  9. Nintendo DSi XL Stylus Housing Replacement, Stylus Housing: étape 9, image 1 de 1
    • Remove the stylus from its housing on the right side of the DSi XL.

  10. Nintendo DSi XL Stylus Housing Replacement: étape 10, image 1 de 3 Nintendo DSi XL Stylus Housing Replacement: étape 10, image 2 de 3 Nintendo DSi XL Stylus Housing Replacement: étape 10, image 3 de 3
    • Remove the three 4 mm gold Phillips screws securing the stylus housing to the lower case.

    • Using a spudger, lift the stylus housing off the lower case.

    • Remove the stylus housing from the handheld console.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Brett Hartt

Membre depuis le 04/12/10

127 749 Réputation

143 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

16 562 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 15

Total : 7,707