Introduction

Keeping your device water-proof is paramount in using it to its full potential. Follow this guide to replace the water-proofing O-ring.

Pièces

Aucune pièce nécessaire.

Grasp the clear cover and the white housing and twist the cover counter-clockwise.
  • Grasp the clear cover and the white housing and twist the cover counter-clockwise.

  • The lid may hold fast, but it will come off with some firm twisting.

Ajouter un commentaire

Lift the lid from the device
  • Lift the lid from the device

  • It may be helpful to use a spudger to pry under the lid if there is difficulty in getting a good grip on the smooth plastic.

Ajouter un commentaire

Using a plastic spudger, lift the o-ring from the lid Using a plastic spudger, lift the o-ring from the lid Using a plastic spudger, lift the o-ring from the lid
  • Using a plastic spudger, lift the o-ring from the lid

Ajouter un commentaire

Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads
  • Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Vinny Capone

Membre depuis le 18/10/2013

549 Réputation

5 tutoriels rédigés

Équipe

University of Maryland, Team 2-4, Gulbrandsen Fall 2013 Membre de l'équipe University of Maryland, Team 2-4, Gulbrandsen Fall 2013

UMD-GULBRANDSEN-F13S2G4

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 93