Introduction

This guide will show you how to remove the phone's vibrator used for the vibrate ring setting

Pièces

Aucune pièce nécessaire.

Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Ajouter un commentaire

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Ajouter un commentaire

Grip the front cover from the bottom.
  • Grip the front cover from the bottom.

Ajouter un commentaire

Lift the front cover off.
  • Lift the front cover off.

Ajouter un commentaire

Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Ajouter un commentaire

Insert spudger along edge of assembly and gently lift assembly away from case
  • Insert spudger along edge of assembly and gently lift assembly away from case

Ajouter un commentaire

Remove assembly from phone
  • Remove assembly from phone

Ajouter un commentaire

The logic board now sits on top of the phone.
  • The logic board now sits on top of the phone.

Ajouter un commentaire

Lift the logic board out of the phone.
  • Lift the logic board out of the phone.

Ajouter un commentaire

Locate battery charger connector
  • Locate battery charger connector

Ajouter un commentaire

Grasp top and bottom of battery charger connector on the left side
  • Grasp top and bottom of battery charger connector on the left side

Ajouter un commentaire

Lift out the battery charger connector
  • Lift out the battery charger connector

Ajouter un commentaire

Grasp vibrator which protrudes from the battery charger connector
  • Grasp vibrator which protrudes from the battery charger connector

Ajouter un commentaire

Lift the vibrator out of the battery charger connector.
  • Lift the vibrator out of the battery charger connector.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Membre depuis le 05/10/2010

1 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 22-3, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,076