To start, press one of the latches at the top of the phone to open the rear cover.
  • To start, press one of the latches at the top of the phone to open the rear cover.

Ajouter un commentaire

Carefully press the other latch.
  • Carefully press the other latch.

Ajouter un commentaire

Open rear cover by this side.
  • Open rear cover by this side.

Ajouter un commentaire

Press the three latches to open this side of the cover.
  • Press the three latches to open this side of the cover.

Ajouter un commentaire

Remove the rear cover.
  • Remove the rear cover.

Ajouter un commentaire

Removed rear cover. See  the latches .
  • Removed rear cover. See the latches .

Ajouter un commentaire

Remove the screws using Torx T6 screw driver.
  • Remove the screws using Torx T6 screw driver.

Ajouter un commentaire

Remove six T6 screws.
  • Remove six T6 screws.

Ajouter un commentaire

Remove the assembly. The front cover will be released.
  • Remove the assembly. The front cover will be released.

Ajouter un commentaire

The front cover released.
  • The front cover released.

Ajouter un commentaire

To remove the display , unscrew the T6 Torx  at top.
  • To remove the display , unscrew the T6 Torx at top.

Ajouter un commentaire

CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !
  • CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !

Ajouter un commentaire

Carefully disconnect the Flex cable connector. Then remove the display.
  • Carefully disconnect the Flex cable connector. Then remove the display.

Ajouter un commentaire

Carefully remove the adhesive keyboard membrane.
  • Carefully remove the adhesive keyboard membrane.

  • You can replace it at this step if you need to.

Ajouter un commentaire

You can clean the keyboard surface with alcohol, if you dropped a drink here.
  • You can clean the keyboard surface with alcohol, if you dropped a drink here.

Ajouter un commentaire

When you replace the keyboard membrane,  align the two contacts at bottom.
  • When you replace the keyboard membrane, align the two contacts at bottom.

Ajouter un commentaire

You can wash the front cover and keyboard if they are dirty.
  • You can wash the front cover and keyboard if they are dirty.

Ajouter un commentaire

Keyboard - clean it if necessary.
  • Keyboard - clean it if necessary.

Ajouter un commentaire

Rear side of the circuit board.
  • Rear side of the circuit board.

Ajouter un commentaire

Speaker and antenna contacts.
  • Speaker and antenna contacts.

Ajouter un commentaire

If necessary, you can replace the joystick, the button module or the connector housing.
  • If necessary, you can replace the joystick, the button module or the connector housing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Jose Gustavo Abreu Murta

Membre depuis le 06/07/2010

2 139 Réputation

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 6,698