Introduction

Splitting the case of the Mifi 2200 is necessary to be able access the internal parts. This is how to go about that.

Pièces

Aucune pièce nécessaire.

Remove the rear cover by pressing down on the cover and pulling it away from the device.
  • Remove the rear cover by pressing down on the cover and pulling it away from the device.

Ajouter un commentaire

Place your finger on the back of the battery located near the edge of the device.
  • Place your finger on the back of the battery located near the edge of the device.

  • Push your finger into the battery and lift up to pop the battery out of the device.

Ajouter un commentaire

Using a metal spudger, pry open the device around the seam between the front and back cover.
  • Using a metal spudger, pry open the device around the seam between the front and back cover.

  • It may be difficult to split apart, so use force with caution.

  • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

Ajouter un commentaire

Once the seal has been broken all the way around, open the cases using your hands.
  • Once the seal has been broken all the way around, open the cases using your hands.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Justin Russo

Membre depuis le 15/04/2012

196 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 7-36, Maness Spring 2012 Membre de l'équipe Cal Poly, Team 7-36, Maness Spring 2012

CPSU-MANESS-S12S7G36

5 membres

5 tutoriels rédigés

If case gets damaged, is there a place to but the case

Snehraj Merchant - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 7

Total : 1,328