Introduction

For the most comfortable virtual reality experience, the Oculus Rift DK2 should be properly adjusted to the fit the user's preferences. This includes adjusting the distance from the user's eye to the headset lenses. This adjustment may be made using the lens depth adjustment screws located on the sides of the headband frame. These screws are part of the faceplate and cannot be replaced individually. Therefore, this guide will provide instructions regarding the replacement of the entire headband frame.

Pièces

Aucune pièce nécessaire.

Remove front cover plate. Unplug the USB and HDMI cables from the Oculus Rift DK2. Unplug the USB and HDMI cables from the Oculus Rift DK2.
  • Remove front cover plate.

  • Unplug the USB and HDMI cables from the Oculus Rift DK2.

Ajouter un commentaire

Remove the four 3/8" Phillips #0 screws from the inner portion of the headset. Remove the four 3/8" Phillips #0 screws from the inner portion of the headset. Remove the four 3/8" Phillips #0 screws from the inner portion of the headset.
  • Remove the four 3/8" Phillips #0 screws from the inner portion of the headset.

Ajouter un commentaire

With the screws removed, gently pull the headband frame apart from the headset. With the screws removed, gently pull the headband frame apart from the headset.
  • With the screws removed, gently pull the headband frame apart from the headset.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Adam

Membre depuis le 20/01/2015

565 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 18-5, Maness Winter 2015 Membre de l'équipe Cal Poly, Team 18-5, Maness Winter 2015

CPSU-MANESS-W15S18G5

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 494