Introduction

We will show how to tear down to and remove the LCD screen.

Unscrew all immediately visible screws on the body of the camera. Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).
  • Unscrew all immediately visible screws on the body of the camera.

  • Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).

Ajouter un commentaire

Use the plastic opening tool to separate the back cover from the camera. Use the plastic opening tool to separate the back cover from the camera. Use the plastic opening tool to separate the back cover from the camera.
  • Use the plastic opening tool to separate the back cover from the camera.

Ajouter un commentaire

With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen. Unscrew both of these screws. Unscrew both of these screws.
  • With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen.

  • Unscrew both of these screws.

Ajouter un commentaire

Flip the LCD screen over.
  • Flip the LCD screen over.

Ajouter un commentaire

Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.
  • Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.

Ajouter un commentaire

Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard. Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.
  • Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.

Ajouter un commentaire

The LCD screen housing should now be free of the camera. The LCD screen housing should now be free of the camera. The LCD screen housing should now be free of the camera.
  • The LCD screen housing should now be free of the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

GradStudents2011

Membre depuis le 08/09/2011

21 Réputation

3 tutoriels rédigés

Équipe

University of Maine, Team 1-27, Diaz Fall 2011 Membre de l'équipe University of Maine, Team 1-27, Diaz Fall 2011

UMAINE-DIAZ-F11S1G27

1 membre

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 938