Pièces

Aucune pièce nécessaire.

Slide the door located on the bottom of the camera in an outward direction
  • Slide the door located on the bottom of the camera in an outward direction

Ajouter un commentaire

Pull back on the red release tab located on the left side of the battery.
  • Pull back on the red release tab located on the left side of the battery.

Ajouter un commentaire

Slide battery out of camera
  • Slide battery out of camera

Ajouter un commentaire

Remove the 2 screws from the bottom of the camera
  • Remove the 2 screws from the bottom of the camera

Ajouter un commentaire

Using a Phillips head size 0 screwdriver, remove the screw from the right side of the camera
  • Using a Phillips head size 0 screwdriver, remove the screw from the right side of the camera

Ajouter un commentaire

Remove the 2 screws from the left side of the camera
  • Remove the 2 screws from the left side of the camera

Ajouter un commentaire

Separate the front casing from the back using a plastic opening tool, gently. Silver band and buttons will become loose when you remove the two pieces. Silver band and buttons will become loose when you remove the two pieces.
  • Separate the front casing from the back using a plastic opening tool, gently.

  • Silver band and buttons will become loose when you remove the two pieces.

Ajouter un commentaire

Pull the silver bracket off of the camera Pull the silver bracket off of the camera
  • Pull the silver bracket off of the camera

Ajouter un commentaire

Remove the 4 screws on the inner face of the camera. Circuit ribbon is attached at the top left of the camera. Be careful when separating the front and back of the camera. Pull the camera apart into 2 separate pieces.
  • Remove the 4 screws on the inner face of the camera.

  • Circuit ribbon is attached at the top left of the camera. Be careful when separating the front and back of the camera.

  • Pull the camera apart into 2 separate pieces.

Ajouter un commentaire

You should be left with 4 large pieces, the outer case, inner lens piece, outer silver band and back case containing the LCD display.
  • You should be left with 4 large pieces, the outer case, inner lens piece, outer silver band and back case containing the LCD display.

Ajouter un commentaire

Remove 4 screws holding the LCD screen in place. Be cautious of the brackets that come loose when you remove the 3 screws on the right side of the camera
  • Remove 4 screws holding the LCD screen in place.

  • Be cautious of the brackets that come loose when you remove the 3 screws on the right side of the camera

  • LCD Screen is attached to 2 ribbon wires

Ajouter un commentaire

Pull up on the small ribbon wire to disconnect it from the circuit board Flip the little black clip up to remove the larger ribbon wire from the circuit board.
  • Pull up on the small ribbon wire to disconnect it from the circuit board

  • Flip the little black clip up to remove the larger ribbon wire from the circuit board.

Ajouter un commentaire

Using a plastic separating tool, remove the LCD screen from the plastic casing.
  • Using a plastic separating tool, remove the LCD screen from the plastic casing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Ryan Cosgrove

Membre depuis le 10/02/2012

39 Réputation

1 tutoriel rédigé

Équipe

James Madison, Team 3-3, Klein Spring 2012 Membre de l'équipe James Madison, Team 3-3, Klein Spring 2012

JMU-KLEIN-S12S3G3

4 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 8

Total : 1,039