Introduction

The following guide will show the reader how to properly remove the battery from the Palm Pre 2.

Pièces

Aucune pièce nécessaire.

Make sure your Palm Pre 2 is turned off before taking apart the phone. Use a plastic opening tool to remove the rear cover. Slide the opening tool along the slit to release the plastic tabs.
  • Make sure your Palm Pre 2 is turned off before taking apart the phone.

  • Use a plastic opening tool to remove the rear cover. Slide the opening tool along the slit to release the plastic tabs.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Pull on the tab to remove the battery. If the battery will not connect, insert a thin piece of cardboard between where the battery lies and the phone. If the battery will not connect, insert a thin piece of cardboard between where the battery lies and the phone.
  • Pull on the tab to remove the battery.

  • If the battery will not connect, insert a thin piece of cardboard between where the battery lies and the phone.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Elliott Van Hoy

Membre depuis le 22/01/2018

256 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S1-G6, Freund Spring 2018 Membre de l'équipe IUPUI, Team S1-G6, Freund Spring 2018

IUPUI-FREUND-S18S1G6

2 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 49