Introduction

You will remove the battery when it needs to be charged. You should also remove the battery and SD card before opening the camera to access the screen, motherboard, flash, lens, or any other internal part of the camera.

Slide the bottom panel in the direction of the arrow on the panel.
  • Slide the bottom panel in the direction of the arrow on the panel.

Ajouter un commentaire

Pull/lift open the battery cover in the direction directly away from the camera.
  • Pull/lift open the battery cover in the direction directly away from the camera.

Ajouter un commentaire

Push the small gray plastic tab away from the battery in order to release the battery.
  • Push the small gray plastic tab away from the battery in order to release the battery.

Ajouter un commentaire

Pull the battery out of the camera.
  • Pull the battery out of the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zoe Hinck

Membre depuis le 12/04/2012

29 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 6-19, Amido Spring 2012 Membre de l'équipe Cal Poly, Team 6-19, Amido Spring 2012

CPSU-AMIDO-S12S6G19

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 759