Aller au contenu principal

Panasonic Lumix DMC-FX07 Back Cover Replacement

Ce dont vous avez besoin

  1. Panasonic Lumix DMC-FX07 Back Cover Replacement, Battery: étape 1, image 1 de 1
    • Move the switch on the battery door to the Open position.

    • The door will automatically swing open after you let it go.

  2. Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 2, image 1 de 2 Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 2, image 2 de 2
    • Push the small gray tab on the top right corner to the left. The battery will pop out slightly.

    • Keep your finger clear of the battery when it pops out.

  3. Panasonic Lumix DMC-FX07 Back Cover Replacement, Memory Card: étape 3, image 1 de 1
    • Push the memory card in and let go.

    • The memory card will pop out slightly.

    • Pull out the memory card.

  4. Panasonic Lumix DMC-FX07 Back Cover Replacement, Back Cover: étape 4, image 1 de 2 Panasonic Lumix DMC-FX07 Back Cover Replacement, Back Cover: étape 4, image 2 de 2
    • Unscrew the small screws on the sides of the camera.

    • The screws on the left side(#00P, 4.7mm) are longer than the screw on the right side(#00P, 3.3mm).

  5. Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 5, image 1 de 2 Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 5, image 2 de 2
    • Unscrew the three small screws on the bottom(#00P, 3.3mm).

    • The bottom will fall off.

  6. Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 6, image 1 de 3 Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 6, image 2 de 3 Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 6, image 3 de 3
    • Lift up the bottom back cover by prying the bottom edge with the spudger.

    • Gently lift up the back cover with your hand from the bottom to the top.

  7. Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 7, image 1 de 3 Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 7, image 2 de 3 Panasonic Lumix DMC-FX07 Back Cover Replacement: étape 7, image 3 de 3
    • Lift the tabs on the ZIF connectors.

    • The ribbon cables should easily come out of the ZIF connectors.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Karissa

Membre depuis le 04/13/12

50 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 6-23, Amido Spring 2012 Membre de l'équipe Cal Poly, Team 6-23, Amido Spring 2012

CPSU-AMIDO-S12S6G23

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 1,399