Introduction

To enter the housing of the handle of the toothbrush, the first step is to remove the back panel. We will be explaining how to pry off the panel to access the other parts inside.

Pièces

Aucune pièce nécessaire.

Place one hand on the toothbrush handle and one on the toothbrush head.
  • Place one hand on the toothbrush handle and one on the toothbrush head.

Ajouter un commentaire

Separate the toothbrush head from the body by twisting it in a counter-clockwise direction.
  • Separate the toothbrush head from the body by twisting it in a counter-clockwise direction.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Insert the spudger along the seem at the top of the panel.
  • Insert the spudger along the seem at the top of the panel.

  • Begin to pry open the panel.

Ajouter un commentaire

Insert the plastic pick at the top  of the seam that has already been slightly pried open.
  • Insert the plastic pick at the top of the seam that has already been slightly pried open.

  • Continue down the seam, prying the rest of the panel open with the spudger.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Samantha Miller

Membre depuis le 07/11/2017

101 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S7-G1, Baechle Fall 2017 Membre de l'équipe IUPUI, Team S7-G1, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G1

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 58