Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console. Caution with the "Do not void" seal, underneath is also a screw Caution with the "Do not void" seal, underneath is also a screw
  • Remove screw covers, two are rubber feet, and the six screws located on the bottom of the console.

  • Caution with the "Do not void" seal, underneath is also a screw

Ajouter un commentaire

If all screws are removed. Use a metal spunger to open the chassis
  • If all screws are removed.

  • Use a metal spunger to open the chassis

Ajouter un commentaire

Slip the three cables out of the sockets. Use a PH01 screwdriver to remove the four screws securing the optical drive Lift up the optical drive and remove the duct tape under the flex cable.
  • Slip the three cables out of the sockets.

  • Use a PH01 screwdriver to remove the four screws securing the optical drive

  • Lift up the optical drive and remove the duct tape under the flex cable.

  • Now the optical drive is free and ready for replacement

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 autre(s) ont terminé cette réparation.

tlroesner

Membre depuis le 13/05/2012

1 715 Réputation

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 24

30 derniers jours : 119

Total : 14,682