Réparez vos affaires Communauté Boutique

Polycom SoundStation Back Housing Replacement

Introduction

Taking off the back of this phone will allow you to look at or replace all of the pieces inside this device. This is a prerequisite guide for any other replacement you would like to accomplish with your SoundStation.

Ce dont vous avez besoin

  1. Polycom SoundStation Back Housing Replacement, Back Housing: étape 1, image 1 de 1

    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

    Traduire

  3. Polycom SoundStation Back Housing Replacement: étape 2, image 1 de 2 Polycom SoundStation Back Housing Replacement: étape 2, image 2 de 2

    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Cali Nowak Credit

Membre depuis le 09/02/14

431 Réputation

4 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 Membre de l'équipe USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014

USFSM-STEWART-F14S1G3

3 membres

14 tutoriels rédigés

Un commentaire

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 6

Total : 1,152